VW T5 ABS Pump 7H0907379P vs 7H0907379S: Key Differences

The Volkswagen Transporter T5 uses several ABS pump and control-module configurations, so exact part-number identification is important when sourcing a replacement. This guide focuses on VW T5 ABS Pump 7H0907379P vs 7H0907379S: Key Differences.

Why exact identification matters

The numbers 7H0907379P and 7H0907379S are associated with T5 ABS assemblies. Related VW numbers include 7H0614117 and 7H0614117A, while ATE numbers may also appear on the label. A replacement should be matched against the complete number on the original unit rather than selected from a photograph or a general vehicle description.

Symptoms worth investigating

ABS warning lights, stability-control warnings, loss of wheel-speed information, diagnostic communication problems and speedometer-related symptoms can all lead to an ABS diagnosis. These symptoms do not automatically prove the pump or electronic module has failed. Sensors, wiring, power supplies, grounds and communication faults can create similar symptoms.

A sensible diagnostic process

Begin with a complete diagnostic scan and record the exact fault codes. Check battery voltage, fuses, grounds and the ABS connector. Inspect the wiring and connectors for corrosion or water ingress. If the scan tool cannot communicate with the ABS module, check electrical supply and communication circuits before replacing the unit. If communication is available, live wheel-speed data can help identify sensor faults.

Buying a replacement

Before ordering a used ABS assembly, compare the full VW part number, suffix, connector arrangement and the numbers on the hydraulic block and electronic module. A unit that looks identical may have a different specification. For the 7H0907379P assembly, BVS ONLINE has a dedicated product page for 7H0907379P / 7H0614117. Always compare the original component with the listing before purchase.

After replacement

ABS repairs involve the braking system and should be completed by a suitably qualified technician. Depending on the vehicle and replacement unit, brake bleeding, coding or calibration may be required. After installation, rescan the vehicle, confirm module communication, check wheel-speed readings, clear relevant faults and carry out a controlled road test.

Final takeaway

The most important rule is simple: match the exact part number. 7H0907379P and 7H0907379S are closely related references, but similar appearance alone is not enough to establish interchangeability.

View the matching BVS product: VW T5 ABS Pump & Control Module 7H0907379P / 7H0614117 | OEM