.jpeg)
VW T5 ABS Pump 7H0907379P / 7H0614117: Complete Buyer, Fault and Fitment Guide
The VW Transporter T5 ABS system is a high-value repair area where accurate diagnosis and exact part-number matching matter. This guide focuses specifically on the 7H0907379P electronic module paired with hydraulic reference 7H0614117.
Key part-number families
For this pre-facelift T5 ABS generation, important references include 7H0907379P / 7H0614117 and 7H0907379S / 7H0614117A. The electronic module number and hydraulic-unit number should both be recorded from the original assembly. A similar casing does not establish interchangeability.
Symptoms and fault codes
Commonly reported symptoms for this ABS generation include no communication with the ABS controller, ABS and traction-control warning lights, a flashing handbrake warning and audible warnings. Diagnostic codes reported for these units include 00285, 00290, 01130 and 01276. A code should lead to testing, not automatic parts replacement.
Diagnosis before replacement
Check battery voltage, relevant fuses, module power and grounds, wiring and connector condition. Wheel-speed-sensor codes should be diagnosed at the sensor, wiring and signal level before assuming an internal ABS controller fault. For 01276, the hydraulic pump circuit and supply should be assessed. Save a diagnostic scan before removing the original module.
Why P and S must not be guessed
7H0907379P and 7H0907379S are different complete references. Their associated hydraulic references are also different: 7H0614117 and 7H0614117A respectively. Burton VAG Spares recommends matching the exact original references or obtaining reliable application-specific confirmation before purchasing a different suffix.
Coding and setup after installation
Depending on the vehicle and replacement procedure, coding, adaptation, calibration or other diagnostic setup may be required. Keep the original unit until the repair is fully completed and confirm the installation procedure with the technician carrying out the work.
7H0907379P / 7H0614117 for sale
Need 7H0907379S / 7H0614117A?
If the label on your van shows 7H0907379S and 7H0614117A, contact Burton VAG Spares with clear photographs of the labels and your vehicle details. We can check current availability without assuming the P unit is a substitute.
What to send before ordering
For the strongest fitment check, send: the complete electronic ABS number; the complete hydraulic-unit number; registration or VIN; a clear label photograph; connector photographs if possible; and the diagnostic fault code or symptom that led to the diagnosis.
Frequently asked questions
Are 7H0907379P and 7H0907379S the same?
They are different complete part references. Do not treat them as interchangeable based on appearance alone.
Which hydraulic references go with them?
7H0907379P is commonly paired with 7H0614117, while 7H0907379S is associated with 7H0614117A in this T5 ABS generation.
Does fault code 01130 prove the ABS module is faulty?
No. It is a useful diagnostic clue, but wiring, supply, sensors and related system conditions should be considered before replacing the unit.
Can a replacement need coding?
Yes. Coding, adaptation or calibration can be required depending on the vehicle and installation procedure.
Can I collect and test a unit?
Where practical, collection and testing before purchase may be possible. Correct part-number verification remains essential.
Burton VAG Spares
Burton VAG Spares specialises in genuine used automotive electronics and hard-to-find VAG parts. UK delivery and worldwide shipping are available. For these ABS units, send the exact references rather than ordering from appearance alone.
Comments