VW T5 ABS Pump 7H0614117: Identification and Coding Guide

VW T5 ABS Pump 7H0614117: Identification and Coding Guide

The VW T5 ABS pump and control module combines hydraulic and electronic functions, so correct identification is particularly important. Reference 7H0614117 should be compared with the original unit before buying a used replacement. This guide covers the key checks.

Start with the full reference

Write down every visible number, including the VW reference and any manufacturer or Bosch/ATE number. Compare the complete number, not a shortened version.

Vehicle year and engine details are useful supporting information, but they should not replace exact-number verification.

Hydraulic and electrical checks

Compare the hydraulic port layout, connector position, mounting bracket and overall housing. Photographs should show these details clearly.

Inspect for corrosion, cracked housings, damaged threads and bent fittings. Hydraulic components deserve particular care because physical damage can make installation unsafe.

Diagnostics after installation

ABS systems commonly require coding, basic settings, calibration or other diagnostic procedures after a replacement. The exact procedure depends on the vehicle and module.

A diagnostic scan before replacement can help distinguish an ABS module fault from sensor or wiring faults.

BVS reference

See the BVS VW T5 ABS Pump & Control Module 7H0614117 - Used page: https://www.burtonvagspares.com/product-page/vw-t5-abs-pump-control-module-7h0614117-used.

FAQ

Is 7H0614117 compatible with every T5? No. Check exact number and specification.

Can coding be required? Yes.

What should photographs show? The label, connectors, housing and hydraulic layout.