How to Identify the Correct VW T5 ABS Pump 7H0907379P

How to Identify the Correct VW T5 ABS Pump 7H0907379P

The easiest way to avoid an incorrect ABS purchase is to identify the original unit before searching for a replacement. For the relevant T5 assembly, 7H0907379P and 7H0614117 are key numbers to record.

Step 1: photograph the label

Take clear photographs of every label and connector. Make sure the full part number and suffix can be read. Do not rely on memory or a partial number.

Step 2: record all numbers

• 7H0907379P.

• 7H0614117.

• Any ATE numbers.

• Any additional module or hydraulic identifiers.

Step 3: compare the physical unit

Check connectors, mounting points, hydraulic pipe arrangement and overall configuration. The correct replacement should correspond physically as well as numerically.

Step 4: verify the vehicle

Use the registration or VIN and confirm engine, drivetrain, body style and braking specification. This is especially important where multiple T5 ABS variants exist.

Step 5: plan the post-installation work

Allow for diagnostic coding, adaptation/basic settings and brake-system bleeding where required. A replacement part is only successful when the vehicle is correctly configured and the braking system is verified.

Once your numbers match, compare the listing at the VW T5 ABS pump 7H0907379P product page.

You can also use our complete 7H0907379P compatibility guide as a reference.

Frequently asked questions

Does 7H0907379P fit every VW T5?

No. ABS specification varies by vehicle, braking system, engine, equipment and market. Match the complete part number and connectors against the original unit before ordering.

Is 7H0614117 the same part?

It is a closely associated VW number used with 7H0907379P on relevant T5 ABS assemblies, but the complete identification on the vehicle should be matched rather than relying on one number alone.

Will coding or adaptation be needed?

It can be. After replacement, professional diagnostic equipment may be required for coding, basic settings, bleeding and clearing stored faults depending on the vehicle and replacement unit.

What should I compare before buying?

Compare 7H0907379P, 7H0614117, connector arrangement, hydraulic block, mounting points and vehicle specification. If uncertain, provide the VIN/registration and a photograph of the original label for a compatibility check.

For the exact used unit currently listed by BVS ONLINE, see the VW T5 ABS pump 7H0907379P product page.